you are operating a vessel and see a displayed diver down flag how far must you stay from the flag?

Vessels not involved in diving operations shall maintain a distance of at least 100 feet from a diver-down flag that has been raised. The placement of a diving flag in an area that is already occupied by other boats, or in a location where the diver’s diving operation will disrupt the regular flow of canal traffic, is not recommended.

How far must you stay from a diver-down flag?

All boats operating in a river, inlet, or channel shall make a reasonable effort to maintain a distance of at least 100 feet from a divers-down device. In open seas, boats must make a reasonable attempt to keep a distance of 300 feet between themselves. Divers should keep the same distances between themselves and their displayed equipment for their own safety.

How far must the vessel stay from a displayed divers down flag when operating faster than idle speed?

Under state legislation, scuba divers and snorkelers are required to fly a diver-down flag to indicate the diving area they are in. Vessel operators are not permitted to operate within 50 feet of a diver-down flag that has been shown, and they are required to decrease speed to “idle speed” when within 200 feet of the flag.

You might be interested:  when you are in a speed zone posted as "slow speed, minimum wake," your vessel should:? (TOP 5 Tips)

How far should you be from a diver?

Maintain a minimum of 300 feet (90 meters) between diver down flags and buoys in open water, and a minimum of 100 feet (30 meters) between diver down flags and buoys in inlets or navigation channels. Divers and boaters must be proactive in their awareness of one another in order to prevent injuries and death caused by propeller and vessel impacts.

What do you do if you see a diver-down flag?

Flags that point downward

  1. Vessels must maintain a distance of at least 50 feet from the flagpole. When operating outside of 50 feet, vessel operators must maintain “idle speed” for a distance of 150 feet or more. When there is an emergency, patrol or rescue vessels are exempt from these rules.

What should you do when you see a displayed diver-down flag while boating?

Divers and snorkelers are required to keep within 100 feet of their flag at all times. Vessels not involved in diving operations shall maintain a distance of at least 100 feet from a diver-down flag that has been raised.

How far must a vessel stay away from a displayed diver-down flag quizlet?

State legislation mandates that scuba divers or snorkelers show a diver-down flag to indicate the diving area where they are diving or snorkeling. Scuba divers and snorkelers must always keep a safe distance of 75 feet between themselves and a diver-down flag. Vessel operators are required to maintain a distance of at least 150 feet from a diver-down flag that has been shown.

What is the diver-down flag that is used on Virginia Waters?

Divers Flag: The red-and-white divers flag, which must be at least 12 inches by 12 inches in size, is used on state waterways. On vessels operating in federally regulated waters, an International Code Flag A (also known as the Alfa flag) in blue and white, at least 3.3 feet (one meter) in height and clearly visible from all directions, must be flown at all times.

You might be interested:  what blood vessel has the lowest blood pressure? (TOP 5 Tips)

How far must you stay away from a diver-down flag in Canada?

A diver should keep his or her distance from the flag within 100 metres (328 ft). Boats not participating in diving operations shall maintain a distance of at least 100 metres (328 feet) from a diver-down flag that has been raised.

Which of the following accurately describes a diver-down flag?

A Diver Down Flag indicates that a diver is underwater and has gone down. This signals to boaters not to get too close, allowing the diver to remain safe from the boat and propeller either going down or returning up from a diving expedition. When divers are in the water, a diver down flag should be flown from a vessel or a buoy to signal their presence.

What symbol describes divers-down?

In order for a divers-down warning device to function properly, it must have a divers-down sign. The sign is a red rectangle or square with a diagonal white stripe running across it. If the symbol is rectangular, the length may not be less than the height or more than 25 percent greater than the height unless the sign is also rectangular.

Leave a Comment

Your email address will not be published. Required fields are marked *