by law what is the minimum distance a vessel must remain from a displayed diver down flag? (Solution)

Vessels must maintain a distance of at least 50 feet from the flag. Operators who need to approach the diving area must first obtain permission from the person who planted the flag or the boat that is displaying the flag, whichever is greater.

How far does a boat have to stay away from a diver?

All vessels must maintain a minimum distance of 50 metres between themselves and boats, buoys, or locations with diving signals. Whenever it is not practicable to maintain a 50-metre clearance or when in the area of a diving signal, all boats must proceed at a safe pace and with appropriate caution until they are far clear of the water, keeping a close eye out for individuals in the water.

How far must a vessel stay from a displayed diver-down flag when operating faster than idle speed?

Under state legislation, scuba divers and snorkelers are required to fly a diver-down flag to indicate the diving area they are in. Vessel operators are not permitted to operate within 50 feet of a diver-down flag that has been shown, and they are required to decrease speed to “idle speed” when within 200 feet of the flag.

What is the minimum safe distance to keep from a dive flag on the water NSW?

You must maintain a minimum distance of 60 metres from a diving flag at all times, and if maintaining that distance and speed is not possible, you must maintain a safe distance and speed.

What is the minimum distance you should anchor your vessel from an underwater submarine cable?

It is not permitted to anchor within 200 meters of underwater cables.

How far must a vessel stay away from a displayed diver-down flag quizlet?

State legislation mandates that scuba divers or snorkelers show a diver-down flag to indicate the diving area where they are diving or snorkeling. Scuba divers and snorkelers must always keep a safe distance of 75 feet between themselves and a diver-down flag. Vessel operators are required to maintain a distance of at least 150 feet from a diver-down flag that has been shown.

How far must you stay away from a skier down flag?

Vessel operators are not permitted to operate within 50 yards of a skier-down flag that has been hoisted.

How many feet from a diver-down flag must all vessels in open waterways must attempt to stay?

Dive operators must make a reasonable effort to remain within 100 feet of a divers-down flag or a buoy while diving in rivers, inlets, or navigation channels, and within 300 feet when diving in open water.

When driving a powered vessel at 6 knots or more what is the minimum distance you must keep from the shore and structures where possible?

A minimum distance of 30 meters must be maintained between powered vessels, including personal watercraft, traveling at a speed of 6 knots or greater and: other vessels, including those moored or at anchor; and, other vessels, including those moored or at anchor. a variety of constructions such as jetties, bridges, and navigational markers the water’s edge

How far does a boat have to be from shore?

If you are within 100 feet of a swimmer, you must not operate a vessel faster than “slow, no wake speed,” unless the vessel is supporting the swimmer. Don’t operate your boat closer than “slow, no wake speed” to the coastline of any lake you’re on. In the case of motorboats other than personal watercraft, too near to the coastline implies within 100 feet of the shoreline.

How close to shore Can you anchor?

Anchoring is not permitted in some areas. Within 150 feet of any marina, boatyard or vessel launching facility is not permitted to anchor. It is not permissible to anchor within 300 feet of facilities used for service or repairs. It is not permitted to anchor within 100 feet of the clearly stated borders of a public mooring.

When anchoring a vessel What are the factors to consider?

Preparing the anchor consists of the following steps:

• Light to moderate circumstances need the use of a 5:1 length of chain to depth ratio or an 8:1 length of rope to depth ratio. As you approach the area, look around for other boats. Choose a decent anchorage location, ensure that the water depth is sufficient, then approach the location slowly into the wind or tide (keeping an eye out for other boats).